Stainless Steel 316 Peforated Sheets are available with us in many different forms like coiled, rolled, hot rolled, foils, ring, strip, and flat blanks, etc. The reason for their enhancement in quality is the addition of chromium and other metals which makes them workable in environments of extremities as well. They are widely used in industries of very high importance like oil and gas, and so on. The sheets that we produce are indicated with universal gauges of ASTM A240 and ASME SA 240 so they can be utilized around the world. Aside from these, they are even standardized with different forms.
Size is an essential viewpoint and that is the reason we have a size range for these fittings running from 1000mm to 6000mm in width, 2000 to 6000mm in length with a thickness of 4mm to 100mm. If you need these sheets in any other size range then you can get in touch with us and put in a request of your size need. We will convey them to you in the speediest conceivable way.
Table Of Content
An item is comparable to its quality and to guarantee the best quality all our item experience through different tests that are done on them. We perform tests like mechanical tests, hardness tests, concoction investigation, smoothing test, miniaturized scale and large-scale tests and any more. All these tests give the best consumer loyalty and quality. These Stainless Steel 316 Peforated Sheets are then pressed with selective care and harm security convention so no mischief should be possible on these fittings. Once tried and pressed we convey these fitting at the quickest rate and at the least expensive cost.
Standard : ASTM / ASME A240 / SA240 Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Thickness : 0.1mm to 12 mm Thk Form : Decorative Round Hole, Dimpled, Square Holes, Gold Mirror Round Hole, Round Punch, Etched, Colored Perforated Sheets Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | - | Z7CND17-11-02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| Element | SS 316 |
| C | 0.08 max |
| Mn | 2.0 max |
| Si | 1.0 max |
| P | 0.045 max |
| S | 0.030 max |
| Cr | 16 – 18 |
| Ni | 11 – 14 |
| Mo | 2 – 3 |
| Fe | 67.845 min |
| Element | SS 316 |
| Density | 8.0 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
| Elongation | 35 % |
Decorative Pattern SS 316 Perforated Sheets
SS 316 Perforated Sheet
A240 SS 316 Perforated Sheets
UNS S31600 Perforated Sheets
SS 316 Mirror Finish Perforated Sheet
SS 316 Galvanized Perforated Sheets
WERKSTOFF NR. 1.4401 Perforated Sheet
2b finish SS 316 Perforated Sheet
SS 316 Round Hole Perforated Sheets
SS 316 Dimpled Perforated Sheet
WERKSTOFF NR. 1.4436 Perforated Sheet
SS 316 CR Galvanized Perforated Sheets
SS 316 Cold Rolled Perforated Sheets
A240 SS 316 Cold Rolled Perforated Sheet
WERKSTOFF NR. 1.4436 Cold Rolled Perforated Sheets
Export Polish SS 316 CR Perforated Sheet
UNS S31600 Cold Rolled Perforated Sheets
Round Hole SS 316 Cold Rolled Perforated Sheets
SS 316 2b finish Cold Rolled Perforated Sheet
WERKSTOFF NR. 1.4401 Cold Rolled Perforated Sheets
SS 316 HR Galvanized Perforated Sheets
SS 316 Hot Rolled Perforated Sheets
A240 SS 316 Hot Rolled Perforated Sheet
UNS S31600 Hot Rolled Perforated Sheet
Export Polish SS 316 HR Perforated Sheets
WERKSTOFF NR. 1.4436 Hot Rolled Perforated Sheet
Hot Rolled Round Hole SS 316 Perforated Sheets
SS 316 2b finish Hot Rolled Perforated Sheets
WERKSTOFF NR. 1.4401 Hot Rolled Perforated Sheet
stainless steel 316 perforated sheet supplier in india, stainless steel 316 perforated sheet manufaturer in mumbai, stainless steel perforated sheets exporter in india, stainless steel perforated sheets price india, stainless steel uns s31600 perforated sheets, stainless steel 316 hot rolled perforated sheets stocks, 316 perforated sheet specification, stainless steel 316 perforated sheet price, stainless steel cold rolled perforated sheet supplier, astm a240 stainless steel 316 perforated sheet exporter, stainless steel 316 perforated sheet exporter in mumbai, stainless steel din 1.4401 perforated sheets, stainless steel 316 cold rolled perforated sheet distributors, ss 316 perforated sheet price list, stainless steel 316 hot rolled perforated sheets dealers, asme sa240 316 perforated sheets suppliers, stainless steel 316 perforated sheet manufaturer in india, stainless steel 316 perforated sheet dealers, 316 stainless steel perforated sheets, stainless steel asme sa240 perforated sheet distributors, stainless steel 316 perforated sheets supplier in mumbai.
For Detail Information Contact Us on Below Numbers
+91 9920181830
Or Drop an email on
Or